| Applicable brand | Sany Heavy Industry |
| Model | SY485H, SY485H-S |
| Inner diameter | 38 mm (1-1/2 inch) |
| Outer diameter | approximately 62 mm |
| Total length | 1200mm |
| Inner layer | Oil resistant nitrile rubber NBR , resistant to hydraulic oil, low permeability |
| Enhancement layer | Four layer high-strength spiral wound steel wire , resistant to pulse and mining heavy load conditions |
| Outer layer | Weather resistant chloroprene synthetic rubber CR , wear-resistant, UV resistant, anti-aging, and oil resistant |
| Joint form | Integrated crimping flange joint (SAE 61 flange, straight head+90 ° curved flange paired), carbon steel galvanized, precision crimping, anti pull off |
| Working temperature range | -40 ℃~+121 ℃ |

This SY485H boom oil cylinder high-pressure oil pipe assembly is built for mining and heavy construction sites. It holds up well against repeated pressure shocks and delivers reliable long service life under cyclic pulse loads.
Its flange fittings are securely crimped to minimize leakage and prevent pull-out under high working pressure. The heavy outer rubber layer resists scratches, grime and outdoor site wear. Matched to OEM dimensions, this assembly fits straight in as a direct replacement with no extra modification for your SANY 485 excavator.
Each SY485H boom oil cylinder high-pressure oil pipe assembly undergoes pressure and leak testing before packing. We never send out untested units.
We are a professional manufacturer specializing in excavator hydraulic hose assemblies and hose fittings. For years, we have supplied replacement hoses to repair shops, excavator dealers and end users worldwide.
Our hoses are manufactured to EN 856 standards. We can provide test reports and certification documents upon request. We own cutting, crimping and pressure testing equipment in our workshop. We do not source finished hoses from other suppliers for resale. In-house production helps us control quality and maintain stable lead times.
We produce hoses for SANY, Komatsu, Hitachi, Volvo, CAT and other mainstream excavator brands. Send us photos or drawings of your hose, and we will check whether we have the correct match for your machine.
After-sales Support If the hose fails due to manufacturing defects on our side, we will remake or replace it for you. We provide technical support to confirm fitting compatibility. Just share your dimensions or sample photos with us. We stay in communication throughout and after your order. Feel free to contact us anytime if you have questions about installation or part matching.


We fit plastic protective caps on both flange ends first to keep dirt out of the hose. We then wrap the hoses with stretch film and pack them into export cartons or wooden cases. Custom shipping marks are available.
MOQ We welcome small trial orders. Normally the MOQ for this SANY 485 boom hose is 2 sets. Better unit prices apply for bulk orders.
Quotation Prices vary based on order quantity, hose length and your destination port. Tell us how many sets you need and your delivery requirements, and we will send you a formal quote promptly.
Payment We accept T/T and L/C.
Logistics & Lead Time Small orders: DHL, FedEx express Bulk orders: Sea freight or air freight Production lead time: 3–7 working days after the deposit is received, subject to your order volume.
1. Q: Are you a manufacturer? Can you make excavator oil pipe assemblies?
A: Yes, we specialize in producing hydraulic oil pipe assemblies for excavators, which support cutting, crimping, and pressure testing. They are compatible with models such as Komatsu, Caterpillar, Sany, Volvo, Hitachi, and Shengang, and can be used for boom, arm, bucket, walking, breaking hammer, and extended arm oil pipes.
2. Q: What parameters are required for ordering oil pipes?
A: Prioritize providing old pipe samples/photos and part numbers; Next, provide: inner diameter, length, joint type (JIC/DIN/BSPP/ORFS/flange), angle (straight/45 °/90 °), pressure rating, and model.
3. Q: Can we customize according to samples or drawings? Does it support OEM?
A: Support, samples, pictures, photos and reproductions are all available. We can also provide OEM services. For bulk orders, we can customize the color of the outer glue and print the customer's logo.
4. Q: What standards are implemented for oil pipes and how long is the warranty period?
A: Oil pipes comply with SAE 100R2/R12/R13 standards, and each assembly undergoes pressure testing before leaving the factory; Normal working condition warranty of 12 months (excluding improper installation, friction damage, and overpressure).

Hot Tags: sy485h boom oil cylinder high-pressure oil pipe assembly, China sy485h boom oil cylinder high-pressure oil pipe assembly manufacturers, suppliers, factory, Construction Machinery Excavator Hydraulic Oil Hose, Construction Machinery Hydraulic Pipe Components, Excavator Complete Oil Pipe System, Excavator Heat resistant Hydraulic Hose, Excavator Hydraulic System Hoses, Excavator Rubber Hose
