Sany SY365H Pilot Pump → Main Pump Inlet Oil Suction Pipe

Sany SY365H Pilot Pump → Main Pump Inlet Oil Suction Pipe

This Sany SY365H pilot pump → main pump inlet oil suction pipe is an SAE100R4 hydraulic suction hose assembly with 19 mm (3/4") inner diameter, standard total length 550 mm, fitted with 7/8-14 UNF JIC female thread, one 90° elbow end and one straight end. Built with spiral steel wire reinforcement, it supports vacuum up to -0.09 MPa and works steadily from -40℃ to +100℃, which avoids hose collapse and oil supply interruption for your excavator hydraulic system. It also fits Sany SY335H and SY375H equipped with the K5V160 main pump.
Send Inquiry
Description
Applicable brand SANY Heavy Industry
-Main compatible models SY365H/SY365H-S (National III and IV versions)
Inner diameter ID 19 mm (3/4 ")
Outer diameter OD 32 ± 1 mm
Total assembly length 550 mm

 

Inner layer (inner rubber) NBR nitrile rubber , resistant to hydraulic oil and low-permeability oil
Enhancement layer high-strength textile curtain fabric+built-in spiral steel wire skeleton  (key: anti negative pressure suction flattening, R4 standard spiral steel wire)
Outer layer (outer rubber) CR chloroprene rubber , resistant to aging, wear, ozone, and outdoor sun exposure of engineering machinery
Joint form -One end: 90 ° bend pipe with American JIC internal thread (7/8-14NDF)
-On the other end: straight head JIC internal thread (7/8-14NDF)
-Surface: Color coated zinc/aluminum alloy compression joint, buckle type assembly
Working medium temperature -40 ℃~+100 ℃ * *, short-term peak can reach 120 ℃

 

 
2
01

 

- Built-in spiral steel wire prevents the Sany SY365H pilot pump → main pump inlet oil suction pipe from collapsing under vacuum during oil intake, preventing oil supply interruption.

- Securely crimped connections reduce oil leakage risks amid continuous vibration on excavators.

- Heavy-duty outer rubber cover withstands sunlight, dust and abrasion on rough job sites.

- Each finished hose undergoes individual inspection prior to packaging to rule out bubbles and faulty crimps.

- Custom lengths and alternate thread fittings are available to match your original hose sample.

02

 

We are a professional hydraulic hose assembly manufacturer based in Shandong, China. We have focused on excavator hydraulic hoses and fittings for many years, supplying hoses to many local machinery repair shops and overseas buyers.

All raw rubber materials and steel fittings are sourced from qualified suppliers. We produce these hose assemblies in line with SAE standards. We can provide test reports if you need them for your local customs clearance.

We do not only produce standard models; our workshop can also make custom hoses according to your drawings, samples or photos. Our workers have rich experience in matching excavator hoses for Sany, Komatsu, Hitachi, Volvo and other brands.

If you receive the hose and find it does not fit your machine, please send us clear photos and dimension data promptly. We will review your case and come up with a solution.

Please note: Before installation, double-check the thread and length against your original hose. Damage caused by incorrect installation is not covered. We respond to your fitment-related technical questions during working hours.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

MOQ: 1 piece for sample orders; bulk pricing is available for orders over 20 pcs.

Package: Each hose is fitted with plastic caps on both ends, then wrapped in bubble film and packed into a carton box. We can mark the shipping mark as per your request.

Price: The listed price applies to the standard 550mm version. Custom sizes or different fittings incur separate costs. Send us an inquiry with your quantity to get a formal quotation. Payment: T/T, Western Union and Trade Assurance are accepted. Delivery time: 2–3 working days for sample orders; 7–10 working days for bulk orders after deposit received.

Shipping: We ship small samples via DHL/FedEx/TNT express, and bulk goods by sea freight. We can also cooperate with your own freight forwarder.

04

Health check

Q: Does this hose fit my Sany SY365H directly?

A: It fits most SY365H with K5V160 main pump. But production batches differ sometimes. Better send your old hose length and thread photo for confirmation.

Q: Can I order hose with different length?

A: Yes, we accept custom length, just tell us the total length you need.

Q: How long can this suction hose last on excavator?

A: Service life depends on working condition. Normally it can serve 8–12 months under regular construction site use.

H50f578c8e27f4bf4aec343a9cea89362h

 

 

Hot Tags: sany sy365h pilot pump → main pump inlet oil suction pipe, China sany sy365h pilot pump → main pump inlet oil suction pipe manufacturers, suppliers, factory, Excavator Complete Oil Pipe System, Excavator Hydraulic Oil Delivery Rubber Hose, Excavator Hydraulic System Hoses, Excavator Rubber Hose, Hydraulic Hoses For Small Excavators, Non standard Excavator Hydraulic Oil Pipes

Send Inquiry