2A8-62-11591 Hose Assembly

2A8-62-11591 Hose Assembly

Hydraulic Hose Assembly Part No. 2A8-62-11591 | Rated Working Pressure: 7MPa (1000PSI), 3/8" size This 2A8-62-11591 Hose Assembly is a pre-crimped OEM replacement hose for excavators. Equipped with matched steel fittings for hassle-free installation, it handles 7MPa (1000PSI) working pressure. Its oil-resistant inner tube, steel wire reinforcement and abrasion-resistant outer cover protect against oil corrosion, cracking and outdoor weathering on construction sites.
Send Inquiry
Description
Part number 2A8-62-11591
Suitable for excavators PC470-10, PC500LC-10
Nominal inner diameter 3/8 "(9.5 mm)
Outer diameter of hose approximately 17.5 mm
Inner layer NBR nitrile rubber, resistant to mineral hydraulic oil

 

Enhancement layer single-layer woven high-strength steel wire
Outer layer CR chloroprene rubber, wear-resistant, weather resistant, ozone aging resistant
Joint Compression type American JIC internal thread 74 ° cone sealing joint (one end straight, one end with quick connect plug)
Rated working pressure 7 MPa (1000 PSI), burst pressure ≥ 21 MPa
Working temperature range 40 ℃~+100 ℃ (under mineral hydraulic oil conditions)

 

 
5
01

 

Built with oil-resistant synthetic rubber inner layer, effectively resisting hydraulic oil erosion and maintaining stable performance under long-term oil circulation.

High-tensile steel wire reinforcement layer with excellent pressure resistance and burst resistance, suitable for heavy-duty excavator working conditions.

Abrasion-resistant outer rubber cover, anti-aging, anti-UV, anti-ozone, able to withstand scratches from rocks, sand and debris on construction sites.

Good flexibility and bending property, less likely to crack or kink when routing around machine frames.

Professionally crimped with dedicated equipment; the fitting and hose bond tightly, greatly lowering the risk of joint oil leakage.

Direct fit for the matching excavator model, precise dimensions, no modification required during replacement.

Wide temperature tolerance, performing reliably in both cold winter and hot summer construction environments.

02

 

We are a factory specializing in excavator hydraulic hoses and hydraulic spare parts. Our entire production process follows the ISO9001 quality management system.

All raw materials undergo inspection before warehousing. Every finished hose is individually pressure-tested and leak-tested to keep defective goods from being shipped out.

We have long supplied hydraulic hose assemblies for mainstream excavator brands including Komatsu, Hyundai, Caterpillar and Kobelco. Custom non-standard hose assemblies are available based on your drawings or samples.

We offer part compatibility checks. Send us your excavator model, and we will verify whether this part fits your machine.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

Minimum order quantity: 1 piece accepted for trial order

Packaging: Standard woven bag or export carton. Extra protective wrapping can be added to avoid fitting damage from impacts during transit.

Logistics: Sea freight, air freight and international express are all available. We can help you select cost-effective shipping options.

Payment term: T/T (Telegraphic Transfer)

After-sales warranty: We offer warranty against manufacturing defects. If any quality issue occurs within the warranty period, we will communicate promptly and work out a solution.

Value-added services: Bulk order quotations are available. Custom lengths and alternative fitting styles are supported. Feel free to send us your inquiry anytime.

04

FAQ

1. Q: Are you a manufacturer? Can you make excavator oil pipe assemblies?
A: Yes, we specialize in producing hydraulic oil pipe assemblies for excavators, which support cutting, crimping, and pressure testing. They are compatible with models such as Komatsu, Caterpillar, Sany, Volvo, Hitachi, and Shengang, and can be used for boom, arm, bucket, walking, breaking hammer, and extended arm oil pipes.
2. Q: What parameters are required for ordering oil pipes?
A: Prioritize providing old pipe samples/photos and part numbers; Next, provide: inner diameter, length, joint type (JIC/DIN/BSPP/ORFS/flange), angle (straight/45 °/90 °), pressure rating, and model.
3. Q: Can we customize according to samples or drawings? Does it support OEM?
A: Support, samples, pictures, photos and reproductions are all available. We can also provide OEM services. For bulk orders, we can customize the color of the outer glue and print the customer's logo.
4. Q: What standards are implemented for oil pipes and how long is the warranty period?
A: Oil pipes comply with SAE 100R2/R12/R13 standards, and each assembly undergoes pressure testing before leaving the factory; Normal working condition warranty of 12 months (excluding improper installation, friction damage, and overpressure).

H50f578c8e27f4bf4aec343a9cea89362h

 

 

Hot Tags: 2a8-62-11591 hose assembly, China 2a8-62-11591 hose assembly manufacturers, suppliers, factory, Construction Machinery Hydraulic Oil Pipes, Excavator 1 inch Hydraulic Hose, Excavator Heat resistant Hydraulic Hose, Excavator Hydraulic Hoses, Excavator Hydraulic Oil Delivery Rubber Hose, Non standard Excavator Hydraulic Hoses

Send Inquiry