02740-00235 Hydraulic Hose Assembly

02740-00235 Hydraulic Hose Assembly

Designed as a drop-in replacement for Komatsu excavators, our 02740-00235 hydraulic hose assembly adopts multi steel wire reinforcement structure and undergoes strict burst pressure and aging testing before delivery. It delivers stable high-pressure resistance, excellent oil resistance and wear resistance, preventing sudden hose failure and costly downtime for your construction equipment. This part is kept in stock for fast delivery.
Send Inquiry
Description
Part number 02740-00235
Compatible models compatible with Komatsu PC200/PC220/PC240-8, PC200-7
Inner diameter of hose 6.3 mm
Outer diameter of hose approximately 12.2 mm
Total length 3.5 meters

 

Inner layer Oil resistant synthetic nitrile rubber NBR  (resistant to hydraulic oil, mineral oil)
Enhancement layer Single layer high tensile steel wire weaving layer (1 layer of steel wire weaving)  (medium pressure pilot, not high pressure 2-layer steel wire)
Outer layer Weather resistant chloroprene rubber CR , ozone resistant, aging resistant, wear-resistant, high and low temperature resistant
Joint form Straight head American JIC 37 ° flared internal thread, two end female joint
Working temperature range -40 ℃~+100 ℃  (short-term peak+120 ℃)
 
55
01

 

As excavator operators know all too well, a sudden hose failure can bring work to a halt and cost you plenty. Our 02740-00235 hydraulic hose assembly is built to stand up to rough site conditions.

Fittings are securely crimped to reduce oil leak risks. It offers good flexibility, which makes routing and on-site installation much easier. The outer rubber layer resists aging, so it stays reliable even in hot, dusty and damp outdoor environments.

We run pressure checks on every hose before packing. It is a direct aftermarket replacement and fits perfectly without any modifications. If you have other requirements, we can also build custom hydraulic hose assemblies for Komatsu, Hyundai, CAT and Kobelco excavators.

02

 

We have focused on making excavator oil pipes and hydraulic hose assemblies for years. Every product goes through burst pressure and aging testing. Just let us know if you need inspection photos or pre-shipment test records, we can prepare these documents for you.

We own our crimping workshop, which lets us control raw material quality from the start. Most regular part numbers are kept in stock, and mixed orders for different excavator models are acceptable. We keep long-term cooperation with overseas spare parts dealers, repair shops and equipment rental firms

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

For orders, we accept a single piece for sample testing. Bulk orders will get you a better unit price.

Most items are ready in stock, and we will confirm the exact lead time once we receive your inquiry.

For packing, each hose is wrapped with protective film and put into cartons. Wooden crates can be arranged for large sea freight orders to avoid damage during transit.

We can offer quotations on EXW, FOB Qingdao and CIF terms. Share your destination port and order quantity, and we will work out an accurate price for you.

For payment, T/T works for most orders, with 30% deposit and the rest paid before shipment. Western Union and PayPal are also available for smaller orders.

We ship small parcels via DHL or FedEx, while bulk cargo goes by sea.

On warranty: we provide replacements for issues caused by our manufacturing defects. Photos or videos will be needed for us to verify the problem. Damage from incorrect installation or overpressure operation is not covered.

If you want samples, real product photos, or a full list of excavator spare parts, just send us your inquiry. We get back to you within 24 working hours on weekdays.

04

 

1. Q: Are you a manufacturer? Can you make excavator oil pipe assemblies?
A: Yes, we specialize in producing hydraulic oil pipe assemblies for excavators, which support cutting, crimping, and pressure testing. They are compatible with models such as Komatsu, Caterpillar, Sany, Volvo, Hitachi, and Shengang, and can be used for boom, arm, bucket, walking, breaking hammer, and extended arm oil pipes.
2. Q: What parameters are required for ordering oil pipes?
A: Prioritize providing old pipe samples/photos and part numbers; Next, provide: inner diameter, length, joint type (JIC/DIN/BSPP/ORFS/flange), angle (straight/45 °/90 °), pressure rating, and model.
3. Q: Can we customize according to samples or drawings? Does it support OEM?
A: Support, samples, pictures, photos and reproductions are all available. We can also provide OEM services. For bulk orders, we can customize the color of the outer glue and print the customer's logo.
4. Q: What standards are implemented for oil pipes and how long is the warranty period?
A: Oil pipes comply with SAE 100R2/R12/R13 standards, and each assembly undergoes pressure testing before leaving the factory; Normal working condition warranty of 12 months (excluding improper installation, friction damage, and overpressure).

H50f578c8e27f4bf4aec343a9cea89362h

 

 

 

Hot Tags: 02740-00235 hydraulic hose assembly, China 02740-00235 hydraulic hose assembly manufacturers, suppliers, factory, Excavator 1 inch Hydraulic Hose, Excavator Rubber Hose, Excavator Rubber Hydraulic Hose, High pressure Hoses For Excavators, Hydraulic Rubber Hoses For Construction Machinery, Non standard Excavator Hydraulic Hoses

Send Inquiry