Komatsu 70-8 12 Meter Extension Arm

Komatsu 70-8 12 Meter Extension Arm

This Komatsu PC70-8 12 meter long reach arm delivers a max digging radius of 12200 mm and max digging depth of 9200 mm, built from Q355B high-strength steel. It is widely used for river dredging, slope trimming and deep foundation excavation, helping you finish far-reaching work without frequent excavator relocation and cut fuel cost. We thicken stress-bearing areas for stable long-distance operation, and support custom adjustment for your site.
Send Inquiry
Description
Product type Excavator extended arm assembly
Compatible model Komatsu PC70-8
Total arm length 12 meters
Maximum excavation radius 12200mm
Maximum excavation depth 9200mm

 

Maximum unloading height 7500mm
Long arm weight 1250kg
Board material Q355D high-strength steel plate
Queen 6 months
Applicable scenarios River dredging, ditch consolidation, slope shaping, deep foundation pit excavation, high and low wall demolition
 
v
01

 

This Komatsu 70-8 12 meter extension arm comes with these practical advantages:

Stress-bearing areas of the boom are thickened and reinforced. It stays stable for far-reaching digging, resisting bending and cracking even after long hours of work.

Precision-bored pin holes ensure great coaxiality. Pins fit with consistent clearance, cutting down shaking and weird noise while working.

Hydraulic piping is pre-routed and the whole oil circuit is tested before shipment. You can mount it to your excavator right after delivery.

Custom options available: adjust arm length, change bucket size or paint color to match your site demands.

Unlike standard excavator arms, it lets you finish distant work without moving the machine often, which saves fuel and boosts your working efficiency.

02

 

We are a manufacturer specializing in excavator attachments, including long reach arms, rock arms, tilt buckets and oil pipes. We own independent cutting, welding and machining workshops, and control every production step in-house.

Certifications: ISO9001 and CE. Every unit goes through a full inspection before shipment.

Welding: Our welders hold valid certificates. UT testing is available for critical welds upon request.

OEM & ODM are supported. We can custom-make long reach arms for other models like Sany, Hitachi, Volvo and more based on your drawings.

We have exported to Southeast Asia, the Middle East and Australia for years, so we fully understand overseas buyers' requirements for long reach attachments.

After-sales Terms

We provide online technical support all the time. If you run into issues with installation or hydraulic matching, send us photos or short videos, and our technicians will guide you step by step.

Consumable parts such as pins and bushings are available separately at factory direct prices.

For quality defects caused by our manufacturing within the warranty period, we will discuss replacement or compensation solutions. Damage from overload, heavy rock impact or improper operation is not covered under warranty.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

Packaging: The boom and stick are wrapped with stretch film and secured by steel frames. Small parts including pins, oil pipes and fittings are packed in fumigation-free plywood cases. Custom packaging plans are acceptable upon your request.

MOQ: 1 set. This 12m long reach arm is available for single-unit orders.

Quotation: EXW factory price by default. If you need FOB or CIF pricing to your destination port, share your port name with us and we will calculate the sea freight. Prices exclude import duties of your country.

Production lead time: Normally 7–12 working days after deposit confirmation. We will inform you in advance if lead time gets longer in peak seasons.

Logistics: Shipped by sea. As an over-length cargo, the long reach arm is normally loaded in flat rack containers or bulk vessels. We will share packing and loading photos before shipment, along with the full set of customs documents.

Payment terms: 30% T/T deposit to start production, the balance of 70% paid before shipment. Sight L/C is available for large orders. Other payment terms can be discussed.

Get in touch If you need detailed drawings, full specification sheets or the latest price, feel free to send us an inquiry. You may also tell us your main working application (dredging / slope trimming / demolition), so we can recommend a suitable bucket for you.

04

 

Q1: Can you make long reach boom for my excavator? Which models are compatible?
A: We customize for most brands: Komatsu, Caterpillar, Volvo, Sany, XCMG, Doosan, LiuGong etc. It is NOT universal for all machines. Please send us excavator model, required reach/depth, pin size and working condition for engineering check.


Q2: Do I need extra counterweight for long reach boom?
A: Usually yes. Longer boom increases front load. Our engineer will calculate and recommend matched counterweight to keep machine stable. It depends on boom length and your excavator weight.

Q3: What lengths can you supply?
A: Common sizes: 12m,15m,18m,20m,22m,24m. We support fully custom length according to your project.




Q4: What is your terms of payment?
A4: T/T, Alibaba Trade Assurance, Paypal, Western Union.

H50f578c8e27f4bf4aec343a9cea89362h

 

 

 

Hot Tags: komatsu 70-8 12 meter extension arm, China komatsu 70-8 12 meter extension arm manufacturers, suppliers, factory

Send Inquiry