20Y-62-2129 Hydraulic Hose Assembly

20Y-62-2129 Hydraulic Hose Assembly

This 20Y-62-2129 Hydraulic Hose Assembly is a high-pressure replacement line built for Komatsu excavators. Matched to exact OEM dimensions for direct fit without modification, every hose has passed pressure testing before shipment to guard against oil leakage, burst failure and costly unplanned downtime. It features multi-layer steel wire reinforcement and an oil-resistant inner tube, with an abrasion, weather-resistant outer cover that holds up well under heavy construction-site conditions including pressure surges, dust and shifting temperatures.
Send Inquiry
Description
Part number 20Y-62-2129
Brand Komatsu
Compatible models PC200-7, PC200-8, PC200LC-7, PC200LC-8
Inner diameter DN32 (1-1/4 ")
Outer diameter approximately 49.5 mm

 

Total length 760 mm
Inner layer NBR nitrile oil resistant rubber , resistant to mineral hydraulic oil
Enhancement layer 4 layers of high-strength steel wire winding (4SP/4SH ultra-high pressure type)
Outer layer CR chloroprene rubber (ozone resistant, wear-resistant, aging resistant)
Joint form Both ends are SAE 61 3000PSI straight flange compression fittings (galvanized carbon steel)

 

Working temperature 40 ℃~+100 ℃  (intermittent peak can reach 120 ℃)
Negative pressure performance can withstand negative pressure of -0.085MPa, meeting the negative pressure conditions of oil suction and return, without flattening or delamination
Weight Approximately 2.2
Warranty 1 year
   

 

 
66
01

 

This 20Y-62-2129 Hydraulic Hose Assembly is a high-pressure hydraulic line made as a direct OEM replacement for Komatsu excavators.

It features multi-layer steel wire reinforcement paired with an oil-resistant synthetic rubber inner tube. Its outer cover delivers strong abrasion and weather resistance, reliably handling continuous heavy-duty operation, repeated pressure surges, dust exposure and fluctuating temperatures on construction sites.

It matches OEM dimensions precisely, so no alterations are required for installation. This hose helps minimize risks of oil leakage, hose rupture and unplanned equipment downtime.

02

 

We are a source factory based in Jining, Shandong, specializing in excavator attachments and hydraulic spare parts. Every hydraulic hose passes pressure testing before shipment. We hold ISO certification and carry out strict QC inspections for every batch.

We maintain ready stock for popular Komatsu replacement parts. If you are not sure about compatibility, send us your machine serial number and we will verify it for you.

After-sales guarantee: We offer replacement or refund per agreement for defects caused by our manufacturing issues. You may confirm fitment before placing your order.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

Minimum order quantity: 1 unit, sample orders are accepted.

 

Packaging: Each unit is wrapped with stretch wrap and packed in a cardboard box. Bulk orders can be shipped in reinforced wooden crates to avoid damage from compression during transit.

 

Lead time: In-stock items ship within 1–3 working days. Lead time for bulk orders will be confirmed separately.

 

Logistics: Sea freight, air freight and express delivery are all available. Shipping cost will be quoted separately based on your delivery address and order quantity.

 

Payment methods: T/T, Western Union, Trade Assurance, etc. Quotation note: Prices shown on the page are for reference only. Send us your order quantity and destination to get an accurate quotation.

04

 

1. Q: Are you a manufacturer? Can you make excavator oil pipe assemblies?
A: Yes, we specialize in producing hydraulic oil pipe assemblies for excavators, which support cutting, crimping, and pressure testing. They are compatible with models such as Komatsu, Caterpillar, Sany, Volvo, Hitachi, and Shengang, and can be used for boom, arm, bucket, walking, breaking hammer, and extended arm oil pipes.
2. Q: What parameters are required for ordering oil pipes?
A: Prioritize providing old pipe samples/photos and part numbers; Next, provide: inner diameter, length, joint type (JIC/DIN/BSPP/ORFS/flange), angle (straight/45 °/90 °), pressure rating, and model.
3. Q: Can we customize according to samples or drawings? Does it support OEM?
A: Support, samples, pictures, photos and reproductions are all available. We can also provide OEM services. For bulk orders, we can customize the color of the outer glue and print the customer's logo.
4. Q: What standards are implemented for oil pipes and how long is the warranty period?
A: Oil pipes comply with SAE 100R2/R12/R13 standards, and each assembly undergoes pressure testing before leaving the factory; Normal working condition warranty of 12 months (excluding improper installation, friction damage, and overpressure).

H50f578c8e27f4bf4aec343a9cea89362h

 

 

Hot Tags: 20y-62-2129 hydraulic hose assembly, China 20y-62-2129 hydraulic hose assembly manufacturers, suppliers, factory, Excavator Boom Hydraulic Hose, Excavator High pressure Hydraulic Hose, Excavator Hydraulic Hose Assembly, Excavator Hydraulic Oil Delivery Rubber Hose, Excavator Hydraulic Oil Hose, Excavator Hydraulic Rubber Hose

Send Inquiry