208-62-72480 Hose Assembly

208-62-72480 Hose Assembly

This 208-62-72480 hose assembly is a direct replacement pilot hydraulic hose rated for 7 MPa (1000 PSI), built to fit Komatsu PC400-7, PC400-8, PC450-7 and PC450-8 excavators. It uses Bridgestone hose blanks with textile braid reinforcement, pre-crimped with standard JIC straight fittings. Ready for installation without any modification to your machine’s pilot control circuit.
Send Inquiry
Description
Part number 208-62-72480
Compatible models PC400-7, PC400-8, PC450-7, PC450-8 series large excavators
Inner diameter 6mm (1/4 ")
Outer diameter 11.5 ± 0.5 mm
Total assembly length 1100mm

 

Inner layer NBR nitrile rubber (resistant to mineral hydraulic oil)
Enhancement layer single-layer high-strength fiber weaving
Outer layer CR chloroprene rubber, resistant to aging, wear, and ozone
Working temperature range -40 ℃~+100 ℃
Negative pressure performance Supports negative pressure conditions of -0.08MPa, which can meet the negative pressure requirements for oil suction in the pilot circuit without collapsing
 
1111
01

 

This 208-62-72480 hose assembly uses Bridgestone hose blanks, matching the original hoses fitted on Komatsu excavators. Its outer rubber cover stands up well to harsh outdoor conditions on construction sites.

Every hose and fitting is crimped in-house on our crimping machines. We inspect every crimp dimension individually to stop oil leaks at the joints.

Built with a flexible textile braid reinforcement, it's simple to route and install in cramped spaces around the excavator cabin and main control valve.

It features precise thread matching. You can swap it directly for your damaged original hose with no extra modifications, fitting perfectly to OEM ports.

It offers strong aging resistance, maintaining stable performance under long-term exposure to sunlight and hydraulic oil.

02

 

We are a local manufacturer with years of experience making excavator hydraulic hose assemblies and hydraulic attachments. We supply hoses for most major excavator brands, including Komatsu, Sany, XCMG, Hitachi, Caterpillar and others.

We adhere to standard hydraulic hose production processes. All raw rubber compounds and fittings come from certified suppliers. We run routine pressure sampling tests on every batch of finished hoses to ensure stable quality. Test reports can be provided on request. We also offer custom hose sizes and custom fittings for your special requirements on other excavator part numbers.

Our team is very familiar with excavator spare parts. If you are unsure whether this part works for your machine, share your machine serial number with us, and we will verify the compatibility for you.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

MOQ: 1 piece for sample orders. Bulk order discounts are available for larger quantities. Price: The listed price is for reference only. The final price depends on your order quantity and shipping method. Send us an inquiry with your target quantity and delivery country, and we will send you the formal quotation quickly.

Packing Each hose is wrapped with bubble wrap first, then packed into cartons. For large bulk orders, we place cartons on pallets to avoid damage during transit. The plastic dust caps remain on the thread ends to keep dirt out before installation.

Payment Term We accept T/T bank transfer and Alibaba Trade Assurance. Other payment terms can be negotiated for long-term cooperation.

Delivery & Shipping Sample orders: We usually ship within 1–3 working days after payment, provided the item is in stock. Bulk orders: Lead time varies by quantity, normally 5–10 working days. Shipping options: Sea freight, air freight, and express couriers such as DHL / FedEx / TNT are all available. We can calculate the freight cost based on your delivery address.

After-sales Support We inspect every hose carefully before packing. If you receive goods with factory quality defects, contact us with photos, and we will work out a proper solution for you. The warranty does not cover damage caused by incorrect installation, over-pressure operation or on-site abrasion due to improper use. We maintain stock for many common excavator hose part numbers. If you need other Komatsu pilot hoses or hydraulic parts, just send us your part list.

04

 

1. Q: Are you a manufacturer? Can you make excavator oil pipe assemblies?
A: Yes, we specialize in producing hydraulic oil pipe assemblies for excavators, which support cutting, crimping, and pressure testing. They are compatible with models such as Komatsu, Caterpillar, Sany, Volvo, Hitachi, and Shengang, and can be used for boom, arm, bucket, walking, breaking hammer, and extended arm oil pipes.
2. Q: What parameters are required for ordering oil pipes?
A: Prioritize providing old pipe samples/photos and part numbers; Next, provide: inner diameter, length, joint type (JIC/DIN/BSPP/ORFS/flange), angle (straight/45 °/90 °), pressure rating, and model.
3. Q: Can we customize according to samples or drawings? Does it support OEM?
A: Support, samples, pictures, photos and reproductions are all available. We can also provide OEM services. For bulk orders, we can customize the color of the outer glue and print the customer's logo.
4. Q: What standards are implemented for oil pipes and how long is the warranty period?
A: Oil pipes comply with SAE 100R2/R12/R13 standards, and each assembly undergoes pressure testing before leaving the factory; Normal working condition warranty of 12 months (excluding improper installation, friction damage, and overpressure).

H50f578c8e27f4bf4aec343a9cea89362h

 

 

 

Hot Tags: 208-62-72480 hose assembly, China 208-62-72480 hose assembly manufacturers, suppliers, factory, Excavator 1 inch Hydraulic Oil Pipe, Excavator Complete Hydraulic Oil Pipe System, Excavator High pressure Hydraulic Hose, Excavator High pressure Hydraulic Oil Hose, Excavator Hydraulic Rubber Hose, Hydraulic Hoses For Small Excavators

Send Inquiry