207-62-76780 Hydraulic Hose Assembly

207-62-76780 Hydraulic Hose Assembly

This 207-62-76780 hydraulic hose assembly is a 2SN two steel wire braided replacement hose, 1-1/4" (32 mm) inner diameter, standard length 950 mm, ±5 mm tolerance. It is made for Komatsu PC300-8M0, PC360-8M0 and PC390LC-8M0 excavators, fitted with SAE split flange ends, rated working pressure 21 MPa, working temperature from -40℃ to +100℃. Every unit is pressure tested before shipment for reliable anti-leak performance on construction hydraulic systems.
Send Inquiry
Description
Part number 207-62-76780
Compatible models PC300-8M0/PC360-8M0/PC390LC-8M0 excavator
Nominal inner diameter 32 mm (1-1/4 ")
Outer diameter of hose outer layer approximately 49.5 mm
Total assembly length 950 mm

 

Inner layer NBR nitrile rubber , resistant to hydraulic oil
Enhancement layer Two layers of high-strength steel wire braided layer
Outer layer CR chloroprene rubber , resistant to aging, wear, and ozone
 
Joint Form SAE Flange Joint, Carbon Steel Galvanized Flange Compression Assembly, Straight End Flanges at Both Ends
Working medium temperature -40 ℃~+100 ℃ ; Short term peak up to 120 ℃ (mineral hydraulic oil)

 

 
5
01

 

This 207-62-76780 hydraulic hose assembly is manufactured to match OEM dimensions exactly. It works as a direct drop-in replacement, with no extra modification required during installation.

It features a secure crimp joint between the hose body and flange fitting, greatly lowering oil leakage risks under sustained high-pressure working conditions.

The outer rubber cover delivers reliable resistance against abrasion, UV sunlight and harsh outdoor construction-site conditions.

Every finished hose goes through individual pressure testing prior to packing, to rule out faulty units.

Custom length options are available if you have special project requirements.

02

 

We are a professional manufacturer focused on excavator hydraulic hoses, pipe assemblies and hydraulic fittings, located in Shandong, China. We have our own hose crimping workshop and test bench. All our hydraulic hose products comply with international industry standards. Our main products cover replacement hoses for Komatsu, Sany, Volvo, Hitachi, XCMG and other mainstream excavator brands.

We perform pressure testing on every finished hose assembly. Raw rubber materials and steel wire are sourced from stable qualified suppliers. We can provide batch test reports if you need. Our products meet SAE hydraulic hose standards.

If you find any quality problems caused by our production after receiving the goods, please send us photos or videos for inspection. We will quickly work out a replacement or compensation plan for you.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

Each hose is fitted with plastic protective caps on both ends to keep dirt and dust out. We pack hoses in woven bags or carton boxes. A plywood case is optional for bulk orders to avoid damage during transit.

MOQ

Small trial orders are welcome. The MOQ for this part is 1 pc. We can offer a better unit price for bulk orders.

Quotation

Pricing depends on your order quantity and shipping method. Please share your target quantity and destination port, and we will send you a formal quotation promptly. All prices exclude freight and tax by default.

Payment Terms

We accept T/T and Alibaba Trade Assurance. For new customers, we usually require a 30% deposit before production, with the balance paid before shipment. Terms are negotiable for long-term cooperative customers.

Logistics

We offer sea freight, air freight and express delivery. We will select a suitable shipping method based on your lead time requirement. Once the goods leave our warehouse, we will send you the tracking number and update the shipping status.

04

 

1. Q: Are you a manufacturer? Can you make excavator oil pipe assemblies?
A: Yes, we specialize in producing hydraulic oil pipe assemblies for excavators, which support cutting, crimping, and pressure testing. They are compatible with models such as Komatsu, Caterpillar, Sany, Volvo, Hitachi, and Shengang, and can be used for boom, arm, bucket, walking, breaking hammer, and extended arm oil pipes.
2. Q: What parameters are required for ordering oil pipes?
A: Prioritize providing old pipe samples/photos and part numbers; Next, provide: inner diameter, length, joint type (JIC/DIN/BSPP/ORFS/flange), angle (straight/45 °/90 °), pressure rating, and model.
3. Q: Can we customize according to samples or drawings? Does it support OEM?
A: Support, samples, pictures, photos and reproductions are all available. We can also provide OEM services. For bulk orders, we can customize the color of the outer glue and print the customer's logo.

H50f578c8e27f4bf4aec343a9cea89362h

 

 

Hot Tags: 207-62-76780 hydraulic hose assembly, China 207-62-76780 hydraulic hose assembly manufacturers, suppliers, factory, Excavator Boom Hydraulic Hose, Excavator High pressure Hydraulic Hose, Excavator Hydraulic Oil Hoses, Excavator Hydraulic Oil Pipe, hydraulic hose, Steel Wire Reinforced Hydraulic Oil Hose

Send Inquiry