07400-002A3 Hydraulic Hose Assembly

07400-002A3 Hydraulic Hose Assembly

This 07400-002A3 hydraulic hose assembly is a replacement hydraulic line for Komatsu excavator pilot and low-pressure return circuits. It adopts a 2-wire braided construction with NBR inner tube and CR abrasion-resistant outer cover, fitted with straight JIC 74° cone crimped ends. It works reliably from -40℃ to 100℃ with good vacuum resistance, tight fit to avoid oil leaks after installation. We keep this part in stock and test every hose for pressure and leakage before shipment.
Send Inquiry
Description
Part number 07400-002A3
Compatible brand Komatsu
Compatible models Komatsu PC series excavators (commonly used models such as PC200/PC220/PC240)
Inner layer Nitrile rubber (NBR, mineral resistant hydraulic oil)
Enhancement layer Two layers of high-strength steel wire braided layer

 

Joint form Two end straight head internal thread JIC/American 74 ° cone seal, buckle type permanent crimping assembly
Working temperature -40 ℃~+100 ℃  (for transporting mineral based hydraulic oil)
-Negative pressure performance can withstand negative pressure of -0.085MPa, suitable for return oil and pilot oil suction circuits, will not suck and collapse pipes
Warranty 1 year
   
 
222
01

 

This 07400-002A3 hydraulic hose assembly is manufactured to match Komatsu specifications perfectly. It installs snugly and prevents oil leaks.

The hose and fitting are securely crimped together, so they won't separate under rated working pressure.

Its outer rubber cover resists abrasion and outdoor weathering, delivering a long service life on construction job sites.

Each unit goes through pressure and leak testing prior to packing.

We keep this part in stock and offer quick turnaround for standard orders.

02

 

We are a professional manufacturer of excavator hydraulic hoses and hose fittings based in Shandong, China. We supply hydraulic hose assemblies for many well-known excavator brands including Komatsu, Caterpillar, Sany, Hitachi and Kobelco.

Our rubber hoses have passed pressure and impulse tests. We hold the ISO9001 quality management certificate.

All raw materials are purchased from trusted domestic rubber suppliers for consistent batch quality and minimal variation between orders.

We carry out pressure and leak tests on finished hose assemblies before shipment.

If you receive defective items caused by our manufacturing, we will replace them or issue a refund for faulty pieces.

We offer technical support. We can advise on the correct circuit and help you confirm part compatibility if you are unsure.

We reply to all installation and quality enquiries within 24 working hours.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

Packing: Every hose goes into an individual plastic bag, then packed in export cartons. Bulk shipments will be loaded on wooden pallets to prevent transit damage.

MOQ: 1 pc for ready-stock items; 50 pcs for custom non-standard hoses.

Price: We offer EXW and FOB Qingdao terms. Send us your inquiry with order quantity, and we will share our best quotation.

Payment methods: T/T bank transfer, Western Union, Trade Assurance

Shipping: Small parcels via couriers like DHL / FedEx; bulk cargo by sea or air. We can handle shipping, or you can use your nominated freight forwarder.

Lead time: Stock orders take 1–3 working days. Custom orders take 7–15 days, subject to order quantity.

04

 

1. Q: Are you a manufacturer? Can you make excavator oil pipe assemblies?
A: Yes, we specialize in producing hydraulic oil pipe assemblies for excavators, which support cutting, crimping, and pressure testing. They are compatible with models such as Komatsu, Caterpillar, Sany, Volvo, Hitachi, and Shengang, and can be used for boom, arm, bucket, walking, breaking hammer, and extended arm oil pipes.
2. Q: What parameters are required for ordering oil pipes?
A: Prioritize providing old pipe samples/photos and part numbers; Next, provide: inner diameter, length, joint type (JIC/DIN/BSPP/ORFS/flange), angle (straight/45 °/90 °), pressure rating, and model.
3. Q: Can we customize according to samples or drawings? Does it support OEM?
A: Support, samples, pictures, photos and reproductions are all available. We can also provide OEM services. For bulk orders, we can customize the color of the outer glue and print the customer's logo.
4. Q: What standards are implemented for oil pipes and how long is the warranty period?
A: Oil pipes comply with SAE 100R2/R12/R13 standards, and each assembly undergoes pressure testing before leaving the factory; Normal working condition warranty of 12 months (excluding improper installation, friction damage, and overpressure).

H50f578c8e27f4bf4aec343a9cea89362h

 

 

 

Hot Tags: 07400-002a3 hydraulic hose assembly, China 07400-002a3 hydraulic hose assembly manufacturers, suppliers, factory, Excavator 1 inch Hydraulic Hose, Excavator Complete Oil Pipe System, Excavator Hydraulic Oil Hose, hydraulic hose, Hydraulic Hoses For Construction Machinery, Hydraulic Rubber Hoses For Construction Machinery

Send Inquiry