02765-006A3 Hydraulic Hose Assembly

02765-006A3 Hydraulic Hose Assembly

Our 02765-006A3 Hydraulic Hose Assembly is made to replace the original Komatsu hydraulic hose on large excavators including PC850, PC1250 and PC2000-8. This DN19 / 3/4" 2SN wire braid hose has a working pressure of 250 bar, total length of 330 mm, equipped with swivel JIC fittings. It matches OEM dimensions perfectly so you can install it without modification. The NBR inner rubber handles mineral hydraulic oil well, and the tough CR outer cover resists abrasion, UV and oil splashes on construction sites.
Send Inquiry
Description
Part number 02765-006A3
Compatible models PC850, PC1250, PC2000-8 and other large pine excavators hydraulic oil circuits
Inner diameter 19.0 mm (3/4 inch)
Outer diameter approximately 31.5 mm
Inner layer Oil resistant nitrile rubber NBR (resistant to hydraulic oil)

 

Enhancement layer Two layer high tensile copper plated steel wire braided
Outer layer anti-aging, ozone resistant, wear-resistant synthetic rubber, resistant to oil stains, outdoor sun aging
Joint form Two ends: JIC internal thread 74 ° tapered joint, galvanized anti rust buckle joint
Working temperature range 40 ℃~+100 ℃ (mineral hydraulic oil working condition)
Negative pressure performance can withstand 0.08MPa vacuum negative pressure, and can be used for universal oil suction, oil return, and pressure pipelines
 
333
01

 

This 02765-006A3 Hydraulic Hose Assembly is manufactured to match original Komatsu mounting dimensions exactly, so you can swap out your old hose directly with no extra cutting or fitting adjustments.

Built with a 2SN double steel wire braid reinforcement, it maintains steady performance under high hydraulic pressure and resists bulging or bursting.

Its NBR inner tube delivers reliable compatibility with standard mineral hydraulic oil for extended service life.

The CR outer rubber cover holds up well on rugged job sites, resisting UV sunlight, dust, oil splatter and surface abrasion.

Equipped with swivel JIC fittings, it lets you easily line up threads during on-site installation and cuts down your fitting time.

Every finished hose undergoes individual pressure testing prior to packing to minimize the risk of hydraulic oil leaks.

02

 

We are a local manufacturer focused on hydraulic hose assemblies and excavator spare parts, located in Shandong, China. We fabricate custom crimped hydraulic hoses for most mainstream construction machinery brands, including Komatsu, Caterpillar, Sany, Hitachi, Volvo and more. All our hydraulic hoses meet EN853 industry standards. We have pressure test benches in our workshop. Every finished hose undergoes pressure inspection before shipment. We can provide test records if you need them for bulk orders. We never use recycled low-grade rubber or thin, inferior steel wire. We maintain consistent raw material standards for repeat buyers. We accept orders for both standard part numbers and custom hose production. If you have your own drawings, length or fitting requirements, send us the details, and we will quote and produce accordingly. Our team has many years of experience with excavator hydraulic spare parts. We can help you check fitment if you are unsure whether a hose fits your machine. If you receive the goods and find quality issues caused by our production (such as crimp leakage), contact us with photos or videos. We will arrange replacements or compensation for valid claims. Note: Damage caused by incorrect installation, overpressure operation or improper storage is not covered. We provide ongoing online technical support to help you confirm fitment and share installation guidance.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

Packing Each hose is wrapped with plastic film individually. Small orders are packed in carton boxes. Bulk orders will be packed in plywood cases to protect fittings from bumps and thread damage during transit. We can mark the part number and label information on packages as you request.

MOQ There is no high MOQ for this item. We accept sample orders (1 pc is available for testing). Better pricing will be offered for bulk purchases.

Lead Time Sample orders: 2–3 working days after payment. Bulk orders: normally 7–12 working days, depending on the total quantity. We will notify you in advance if we encounter delays in raw material supply.

Shipping Way We offer multiple shipping options: Express (DHL, FedEx, UPS), air freight and sea freight. We will recommend the most suitable shipping method based on your order quantity and delivery time requirements. Shipping cost is not included in the unit price; we will list freight separately on the proforma invoice.

Quotation All quotes are based on EXW terms by default. Let us know if you need FOB Qingdao pricing, and we can adjust accordingly. Prices are subject to change if raw material costs fluctuate significantly. Quotation validity: 15 days.

Payment Terms T/T (Telegraphic Transfer) is our primary payment method. For bulk orders: 30% deposit before production, balance due before shipment. For small sample orders, full payment is required in advance. Other payment terms can be negotiated for long-term cooperative customers.

04

Health check

Q: Can this hose replace original Komatsu hose directly?

A: Yes, the fitting size and length are made to match OEM part 02765-006A3.

Q: Can you make hydraulic hoses with other part numbers?

A: Sure, send us part number, drawing or hose specs, we can produce.

Q: Do you offer custom length hydraulic hoses?

A: Yes, custom length and fitting types are available.

H50f578c8e27f4bf4aec343a9cea89362h

 

 

 

Hot Tags: 02765-006a3 hydraulic hose assembly, China 02765-006a3 hydraulic hose assembly manufacturers, suppliers, factory, Excavator 1 inch Hydraulic Oil Pipe, Excavator Boom Hydraulic Hose, Excavator Hydraulic Hoses, Excavator Hydraulic System Hoses, Hydraulic Hoses For Small Excavators, Hydraulic Rubber Hoses For Construction Machinery

Send Inquiry