02763-00414 Hydraulic Hose Assembly

02763-00414 Hydraulic Hose Assembly

This 02763-00414 hydraulic hose assembly is a direct replacement for Komatsu PC200, PC220, PC240 excavators. It is built to SAE 100 R2AT specification with 1/2" (12.7mm) inner diameter, two steel wire braids, rated working pressure of 21 MPa and burst pressure above 84 MPa. This ready-to-fit hose comes with 24° cone crimped fittings, made to match the original line for quick field repair without modification.
Send Inquiry
Description
Part number 02763-00414
Compatible models PC series mainstream models, commonly used hydraulic pipeline replacement parts such as PC200/PC220/PC240, etc
 
Inner diameter of hose 1/2 "(12.7mm)
Outer diameter of hose approximately 21.8mm
Total assembly length 1400mm

 

Inner layer Oil resistant NBR nitrile rubber , resistant to hydraulic oil and anti-seepage
Enhancement layer Two layer high tensile steel wire braided layer  (high-pressure type)
Outer layer Weather resistant CR chloroprene rubber , wear-resistant, ozone resistant, and aging resistant
 
Joint form One end is sealed with a straight inner wire 24 ° cone, and the other end is sealed with a 90 ° bent inner wire 24 ° cone (DKO type, hydraulic standard metric 24 ° cone joint, buckle type integrated crimping), galvanized anti rust joint
Working temperature range -40 ℃~+100 ℃ * * (short-term peak 120 ℃)
 
11
01

 

Leak-free crimped connection for this 02763-00414 hydraulic hose assembly: Every fitting is securely crimped, and each unit undergoes pressure testing before shipment to prevent annoying oil leaks on the job site.

✅ Tough outer rubber: Resists mud, rock abrasion and long-term sun exposure typical on construction sites

✅ Great flexibility: Simple to route and fit into cramped spaces on your excavator

✅ Reliable vacuum performance: Will not collapse or deform when used for suction and return lines

✅ Precise thread & angle match: Direct fit upon installation, no extra cutting or rework required

02

 

We are a professional manufacturer focused on excavator hydraulic hose assemblies and hose fittings, based in Shandong, China. We have produced hydraulic hose components for many years and supply many repair shops and machinery dealers across the world.

✅ Quality & Certificates Our production complies with ISO9001 standards. Every finished hose assembly undergoes pressure testing individually before packing. We can provide test reports and CE documents if you need them for local compliance. We never compromise on rubber compound or wire strength. We understand a faulty hose can bring an entire excavator job to a halt, so we maintain strict quality checks.

✅ Our Strength We supply standard replacement hoses and also build custom hoses from your drawings or samples. We keep most common Komatsu hose sizes in stock for quick shipment. Our technicians are familiar with excavator hydraulic circuits and can help you confirm the correct part number if you are unsure.

✅ After-sales Support We offer a 12-month warranty under normal working conditions. If you receive items with manufacturing defects, we will arrange a replacement or refund. If you have fitment issues after receiving the hose, send us photos and machine details, and we will respond and assist you promptly. Note: Warranty does not cover damage caused by incorrect installation, misuse or on-site cutting.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

✅ MOQ (Minimum Order Quantity) We accept 1 pc for this stock part. For bulk orders, better pricing will apply when you order more pieces. We also support mixed orders with other excavator hose parts.

✅ Packaging Each hose will be wrapped with protective film, then packed into cartons. For large shipments, we use wooden pallets to prevent fittings from bending during transit. We can put your label or mark on the package if you need private labeling service.

✅ Shipping & Lead Time In-stock items can ship out within 2–3 working days. For custom hose orders, lead time is normally 10–18 working days. We can ship by air, sea or express (DHL / FedEx). We work on EXW, FOB, CIF terms, you can pick the shipping term you prefer.

✅ Quotation The price shown on site is for reference. Final price depends on your order quantity and shipping method. Send us your target quantity and destination port, we will send you a formal quotation quickly.

✅ Payment Options We accept T/T bank transfer, Western Union and Trade Assurance. For new small buyers, we usually ask 30% deposit before production, balance before shipment. For long-term cooperating customers, we can discuss better payment terms.

04

 

Q: Can I order other Komatsu hose part numbers?

A: Yes, we have a wide range of Komatsu hydraulic hoses in stock. Just send us the part number you need.

Q: Can you make a hose with different length or fittings?

A: Sure, we do custom hose assemblies. Send your drawing or sample photo for quotation.

Q: Do you provide samples?

A: Yes, we can arrange sample for quality check, sample freight cost will be on buyer's side.

H50f578c8e27f4bf4aec343a9cea89362h

 

 

 

Hot Tags: 02763-00414 hydraulic hose assembly, China 02763-00414 hydraulic hose assembly manufacturers, suppliers, factory, Excavator Boom Hydraulic Hose, Excavator Complete Oil Pipe System, Excavator Hydraulic Hoses, Excavator Hydraulic Oil Delivery Rubber Hose, Excavator Rubber Hydraulic Hose, Excavator specific Diesel Fuel Pipe

Send Inquiry