PC220 18 Meter Excavator With Extended Arm

PC220 18 Meter Excavator With Extended Arm

Our PC220 18 meter excavator extended arm delivers a maximum digging radius of 17.6 m, max digging depth of 12.2 m and dumping height up to 13.5 m. It is built for long-reach jobs including river dredging, slope trimming, deep foundation excavation and structure demolition, where a standard boom cannot reach far enough. This complete boom and stick set comes with a 0.4m³ bucket, pins, bushes and full hydraulic pipes, ready to fit your Komatsu PC220-7, PC220-8 and PC220-9.
Send Inquiry
Description
Product type Excavator extended boom+bucket arm assembly
Compatible models Komatsu PC220-7/PC220-8/PC220-9
Total length 18 meters
Maximum excavation radius 17.6 meters
Maximum excavation depth 12.2 meters

 

Maximum unloading height 13.5 meters
Supporting bucket 0.4m ³
Material Q355D high-strength steel
Warranty 6 months
The complete set includes boom, arm, bucket, pin shaft, liner, iron pipe
 
product-1280-1280
01

 

We don't just cut and weld steel plates for this PC220 18 meter excavator extended arm. Every unit goes through stress analysis before we start production. Reinforcement plates are added at high-load zones, helping reduce the chance of bending or cracking while working under heavy loads.

We use argon-rich mixed gas welding for all joints. Every pin hole is precision machined and fitted with copper bushes to boost wear resistance. Hydraulic lines are laid out neatly so your team can take apart and service the arm easily on site. If your project has special requirements, we can adjust the arm length or bucket design following your working drawings.

02

 

We are a construction machinery attachment manufacturer based in Shandong. We keep producing excavator extended arms, buckets and other attachments all year round. Our facility holds ISO9001 and CE certificates, and each finished product will be fully inspected before it leaves our workshop. Many overseas machinery dealers and rental businesses work with us for steady OEM support.

Fitment is something we take very seriously. Our team double-checks all hinge dimensions before packing up the goods, to avoid fitting troubles when you install it on site.

The steel structure carries a 6-month warranty. This does not cover wear parts such as pins, bushings and bucket teeth, or damages caused by improper operation. Should you have any trouble installing the arm after delivery, send over photos or videos. Our technical staff will walk you through the installation remotely. We can also supply spare parts separately at factory cost whenever you need them later.

2026102014121330272
H982b4f6ac3614aaf92e116b5425dfd76j
03

 

MOQ is 1 set. We secure the arm on steel pallets and wrap it with stretch film for protection, with clear marks at hinge connection points. Lead time runs 15–25 working days once we receive your deposit. We can quote EXW or FOB price. Send us your destination port, and we will help work out the estimated sea freight cost.

Payment is by T/T: 30% deposit upfront, with the balance paid before shipment. We ship by sea. We help coordinate container loading and prepare packing lists, commercial invoices and other documents you need for customs clearance.

Just message us if you need product drawings, weight information or videos taken inside our workshop.

04

FAQ

1. Q: Are you a manufacturer? Can you make excavator oil pipe assemblies?
A: Yes, we specialize in producing hydraulic oil pipe assemblies for excavators, which support cutting, crimping, and pressure testing. They are compatible with models such as Komatsu, Caterpillar, Sany, Volvo, Hitachi, and Shengang, and can be used for boom, arm, bucket, walking, breaking hammer, and extended arm oil pipes.
2. Q: What parameters are required for ordering oil pipes?
A: Prioritize providing old pipe samples/photos and part numbers; Next, provide: inner diameter, length, joint type (JIC/DIN/BSPP/ORFS/flange), angle (straight/45 °/90 °), pressure rating, and model.
3. Q: Can we customize according to samples or drawings? Does it support OEM?
A: Support, samples, pictures, photos and reproductions are all available. We can also provide OEM services. For bulk orders, we can customize the color of the outer glue and print the customer's logo.
4. Q: What standards are implemented for oil pipes and how long is the warranty period?
A: Oil pipes comply with SAE 100R2/R12/R13 standards, and each assembly undergoes pressure testing before leaving the factory; Normal working condition warranty of 12 months (excluding improper installation, friction damage, and overpressure).

H50f578c8e27f4bf4aec343a9cea89362h

 

 

 

Hot Tags: pc220 18 meter excavator with extended arm, China pc220 18 meter excavator with extended arm manufacturers, suppliers, factory

Send Inquiry